Відео

Everybody's got their own preference but that thing sounds wretched it sounds horrible but mbrp makes a pretty good slip-on Muffler I've got one on my 05 Sportsman 800 and I love the way it sounds I did the same thing you did with the factory exhaust and then I ended up throwing them away they are complete junk no matter what you do to him unless you completely got the inside of them out and create your own baffle but going to the single mbrp silencer you remove about 8 to 10 lb of weight which also helps it also comes with a screen spark arrestor that you can remove to get more airflow if needed but I love the sound of the mbrp silencer

Awesome thank you so much for sharing your video very easy to follow 😅

Can you add a link where to get this ? Thanks

So I’ve taken my motor apart to rebuild and when I put the cases together an the put the clutch on the motor won’t turn over freely

The part of the video just before you remove the basket nut, can't see it. Is that an ear you were prying open to be able to turn the nut

I know this is an older video but wondering what front bumper that is on the 09?

Would have been nice with some links to find it on amazon.

Hello, Are you interested in testing our products? We would like to invite you to test the Front Bumper for your 2021 Polaris Ranger 1000

best mod is to buy quality, econoline, even used is better than this junk.

Not that easy doesn’t all ways work

I have a 21 sportsman 1000xp highlifter...I didn't need wheel spacers when I did my 2" lift...also the cv axel are the down fall not the pinion bearing

Thank you fellow honda brother

How do you know when the one way bearing is bad?

Any problems with it together after the time going. Gears the clearance is really close with the chain and gears ?? Info thanks

So not a motor rebuild, but a top end rebuild...

If you ride in places like this a lot and aren't into the fast atv/utv your better off buying an Argo or something similar that floats and keeps you dry. One fouled sparkplug or ignition short or the engine dying is disastrous the water backes up in the exhaust and into the cylinder seeping by the rings into the case .

Brand new! Amazing. I can't imagine if we could have these prices in Europe for machines like that!

Still doesn’t work

This has worked for me as well 😀 thanks so much for posting this 👍

Does it turn them good ?

I’m about to work on a 97 fourtrax, this will give me somewhat of an idea on how replace the head gasket. Thank you

Watching this in 2024, used Hondas have definately come up in price since 2020

Pls tell me what you put for storage on the inside roof

so do you wash off your parts with solvent into the sink that ends up contaminating into the sewage system for the city?

Nice work.....Did you do a more in depth install with the wiring on the winch....?

On my 250ex would mine being backwards cause it to jerk and stall when going into gear almost like riding a bike with a clutch but it’s not soposed to need a clutch lol

Where did you buy that fitting that screws the oil filter on

I need these guys doing my snorkel lol

Great video man! I just bought a 09 x2 and the left rear axleshaft spins in the transmission like the splines are broke. I might do the conversion like you talked about.

This actully blew me away! My fourtrax was having the clicking problem like in the video! Thanks for saving me a few bucks on a new starter! Im subscribing just because of this. 👍

Can you explain the wires coming from the solenoid to your DPDT switch? Did you need to run 3 new wires from the solenoid to the switch?

Some advice for you from someone who had this issue: The drier like you currently have needs to be at least 25' from your air compressor for the air in the line to cool where a dryer/filter will have condensation to work! This 25' run will ensure the heat is taken away from the air and helps to produce the moisture you want to take out of the airline. Some people run transmission coolers and the like which also helps to reduce the heat.

Or fix the problem correctly because time is money. That is not fixing it correctly that is kicking the can down the road.

This didn’t work for me an it started for me last week I thought it was the battery so I changed it

Thank you! This is what I needed to see.

Great vid tyvm

Best video for this I could find. If you have trouble with the metal plate lining up then the cage is upside down.

Will this cause slipping and clunking

I had the larger stand up version one and had even MORE mods than you had (all included with the dust collector and vacuum underneath) and I swear to hell I could NOT get that damn thing to be consistent with nearly the identical mechanical interface by drawing from the bottom like you did. I had a metering valve, etc. but I digress, I believe showing that you can have consistent suck and blow with those Eastwood components is a game changer. They must have some secret venturi effect that I just could'nt reproduce. It totally pissed me off and even at 90 PSI, I couldn't get the media to flow properly no matter WHAT values I adjusted. To boot, I had TWO dryers on my line too! Wonder if I should've started with the Eastwood diffuser and gun...

Can you help me, If i tighten both axle bolts the shaft does not turn freely, only tighten one side, break side or diff? the bearing will not last if I tighten both inner nuts , thx

I have a 2012 800 S. How can I run taller tires on it. I'd like 32's.

What did you end up buying it for and selling it for?

Those machines are a shit ton of fun but there's just something about spending $20k+ on a toy that's gonna get the living snot beat out of it

Question, i didnt see where the front winch hooked to a contactor. Are you using 1 contactor for both winches or do they each have their own. Thanks alot i love how youve set this up and will be trying to duplicate!

02 Honda 350 rancher 4x4 or 1998 Honda 300 4x4

Thanks great vibes!! I'm going to go with the 80A though!! The higher the Amps the better the quality!! Just saying as long as the fans are the same size to be able to fit for easy installation that's all that matters!! Really do appreciate the information for what it's worth thanks 👍👍👍👍😊

Where did you find those led headlights?

What happened? I miss your videos!

I keep hearing di-electric grease. Molykote 111 dow cornring is the acutual stuff you use for gaskets and orings. It's high, but it's the best.

I just got a FourTrax 300 almost mint except the rear part of the seat... everything is new motor trans transfer case...kick start and an electric start...paid 900...was that a deal or no deal...I thought it was a good price but it's also a 99 all original plastics and their nice and shiny...gas tank looks new...